Titan65 Aluminum/Brass Mechanical Keyboard Kit [Refurbished]

These are refurbished products and are provided as-is. All sales final for refurbished products. 

This particular Titan65 has small scuff and dent marks on the outer shell. Photos at the end of the image gallery.

Designed to use a burger mount system, sandwiching the plate between washers and gaskets on either side, then using screws to hold the plate to the top of the case — delicious. The side of the case has a slight taper, which blends its faces front to back. Titan65's IBM-adjacent design summons a bold retrofuturistic look, one that's equally appealing in sci-fi hangars and modern desktops.

The board has a 7 degree typing angle with a USB-C port that is parallel to the ground. Its PCB is QMK and VIA compatible. There are through-hole solder and hotswap versions available. Please note, only the hotswap version has RGB.

Total Weight:
With Aluminum Base: 1.35kg (2.97lbs)
With Brass Base: 2.35kg (5.18lbs)

Key Features

• Either [Through-Hole Solder, no RGB]/[Hotswap, with RGB]
• Burger Mounted Plate
• Seamless Assembly with bottom panel
• 7 degree typing angle
• VIA-compatible PCB with Unified C3 Daughterboard (USB-C)
• PCB compatible with 5-pin (PCB mount) and 3-pin (plate mount) switches.
• Per-Key RGB (Hotswap Only)
• ISO Layout (Soldered Only)
• 4mm Aluminum Plate

Kit Contents

• 1x E-Coat 6061 aluminum board top
• 1x E-coat 6061 aluminum base OR Bead-Blasted Brass with Passivation
• 1x Grey Anodized 4mm 6061 Aluminum Plate
• QMK + VIA Compatible PCB
• Unified C3 Daughterboard
• JST Cable
• Assortment of black silicone pads for feet and gaskets
• M3 and M2 Allen Keys

Keycaps and Switches not included

Note: The colors shown are digital renderings. Production colors will be very similar, but not an exact match.

Hotswap PCB Layout:

Soldered PCB Layout:

Other Vendors:
Asia - ILUMKB
EU - CandyKeys
CA - Deskhero

Designed by Phase Studio

Geekhack Thread